Dell Inspiron 5590 Скачать руководство пользователя страница 18

Страница: 18 / 81

Steps

1. Align the notch on the memory module with the tab on the memory-module slot.
2. Slide the memory module firmly into the slot at an angle and press the memory module down until it clicks into place.

NOTE:

If you do not hear the click, remove the memory module and reinstall it.

3. Cover the memory module with the Mylar.

Next steps

1. Install the

battery

2. Install the

base cover

3. Follow the procedure in

After working inside your computer

Hard-drive assembly

Removing the hard-drive assembly

Prerequisites

1. Follow the procedure in

Before working inside your computer

2. Remove the

base cover

3. Remove the

battery

About this task

The following image indicates the location of the hard-drive assembly and provides a visual representation of the removal procedure.

Removing and installing components

Содержание Inspiron 5590


















































































Результаты поиска

Содержание Inspiron 5590

Отзывы:

Dell Inspiron 5590, Руководство по обслуживанию, Страница: 18 / 81

Результаты поиска

Содержание Inspiron 5590

Отзывы: