manualshive.com logo in svg

Dell Inspiron 5590, Руководство пользователя

Поделиться
Скачать
Dell Inspiron 5590 Скачать руководство пользователя страница 90

Option

Description

•

15 Watts

POST Behavior screen options

Option

Description

Adapter Warnings

Allows you to enable or disable the system setup (BIOS) warning messages when you use certain power adapters.
Default setting: Enable Adapter Warnings

Keypad 
(Embedded)

Allows you to choose one of two methods to enable the keypad that is embedded in the internal keyboard.

•

Fn Key Only: This option is enabled by default.

•

By Numlock

NOTE: 

When setup is running, this option has no effect. Setup works in Fn Key Only mode.

Mouse/Touchpad

Allows you to define how the system handles mouse and touch pad input. The options are:

•

Serial Mouse

•

PS2 Mouse

•

Touchpad/PS-2 Mouse: This option is enabled by default.

Numlock Enable

Allows you to enable the Numlock option when the computer boots.
Enable Network. This option is enabled by default.

Fn Key Emulation

Allows you to set the option where the Scroll Lock key is used to simulate the Fn key feature.
Enable Fn Key Emulation (default)

Fn Lock Options

Allows you to let hot key combinations Fn + Esc toggle the primary behavior of F1–F12, between their standard 
and secondary functions. If you disable this option, you cannot toggle dynamically the primary behavior of these 
keys. The available options are:

•

Fn Lock. This option is selected by default.

•

Lock Mode Disable/Standard

•

Lock Mode Enable/Secondary

Fastboot

Allows you to speed up the boot process by bypassing some of the compatibility steps. The options are:

•

Minimal

•

Thorough (default)

•

Auto

Extended BIOS 
POST Time

Allows you to create an additional preboot delay. The options are:

•

0 seconds. This option is enabled by default.

•

5 seconds

•

10 seconds

Full Screen Logo

This option will display full screen logo if your image match screen resolution

•

Enable Full Screen Logo

90

System setup options

Содержание Inspiron 5590




































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды