Dell Inspiron 5590 Скачать руководство пользователя страница 86

Страница: 86 / 99

Option

Description

UEFI Capsule
Firmware Updates

Allows yout to control whether this system allows BIOS updates via UEFI capsule update packages.

•

Enable UEFI Capsule Firmware Updates (enabled by default)

TPM 2.0 Security

Allows you to enable the Trusted Platform Module (TPM) during POST. The options are:

•

TPM On (enabled by default)

•

Clear

•

PPI Bypass for Enabled Commands(enabled by default)

•

Attestation Enable (enabled by default)

•

Key Storage Enable (enabled by default)

•

PPI Bypass for Disabled Commands

•

SHA-256 (enabled by default)

•

Disabled

•

Enabled

NOTE:

To upgrade or downgrade TPM1.2/2.0, download the TPM wrapper tool (software).

Computrace

Allows you to activate or disable the optional Computrace software The options are:

•

Deactivate

•

Disable

•

Activate

NOTE:

The Activate and Disable options will permanently activate or disable the feature and no further

changes will be allowed

Default setting: Deactivate

CPU XD Support

Allows you to enable the Execute Disable mode of the processor.
Enable CPU XD Support (default)

OROM Keyboard
Access

Allows you to set an option to enter the Option ROM Configuration screens using hotkeys during boot. The options
are:

•

Enable

•

One Time Enable

•

Disable

Default setting: Enable

Admin Setup
Lockout

Allows you to prevent users from entering Setup when an Administrator password is set.
Default Setting:

Disabled

Master Password
Lockout

Allows you to disable master password support. Hard disk password need to be cleared before the setting can be
changed

•

Enable Master Password Lockout (Disabled)

System setup options

Содержание Inspiron 5590




































































































Результаты поиска

Содержание Inspiron 5590

Отзывы:

Бренды по названию

Популярные бренды

Dell Inspiron 5590, Руководство пользователя

Результаты поиска

Содержание Inspiron 5590

Отзывы:

Бренды по названию

Популярные бренды