Dell Inspiron 5481 Скачать руководство пользователя страница 87

Страница: 87 / 96

Table 4. System setup options—System information menu (continued)

General-System Information

64-Bit Technology

Displays whether 64-bit technology is used.

Device Information

SATA-0

Displays the SATA-0 device information of the computer.

SATA-1

Displays the SATA-1 device information of the computer.

LOM MAC Address

Displays the LAN On Motherboard (LOM) MAC address of the computer.

Video Controller

Displays the video controller type of the computer.

dGPU Video Controller

Displays the discrete graphics information of the computer.

Video BIOS Version

Displays the video BIOS version of the computer.

Video Memory

Displays the video memory information of the computer.

Panel Type

Displays the Panel Type of the computer.

Native Resolution

Displays the native resolution of the computer.

Audio Controller

Displays the audio controller information of the computer.

Wi-Fi Device

Displays the wireless device information of the computer.

Bluetooth Device

Displays the bluetooth device information of the computer.

Battery Information

Displays whether bluetooth is installed in the computer.

Boot Sequence

Boot Sequence

Displays the boot sequence.

Boot List Option

Displays the available boot options.

Advanced Boot Options

Enable Legacy Option ROMs

Enables or disables the Legacy Option ROMs.

UEFI Boot Path Security

Enables or disables the user to enter Admin password when booting a UEFI
boot path from the F12 Boot Menu.

Date/Time

Displays the current date in MM/DD/YY format and current time in HH:MM:SS
AM/PM format.

Table 5. System setup options—System Configuration menu

System Configuration

SATA Operation

Configure operating mode of the integrated SATA hard drive controller.

Drives

Enables or disables various drives on board.

SMART Reporting

Enables or disables Self-Monitoring, Analysis, and Reporting Technology
(SMART) during system startup.

USB Configuration

Enable Boot Support

Enables or disables booting from USB mass storage devices such as external
hard drive, optical drive, and USB drive.

Enable External USB Port

Enables or disables booting from USB mass storage devices connected to
external USB port.

USB PowerShare

Enables or disables the USB PowerShare.

Audio

Enables or disables the integrated audio controller.

Keyboard Illumination

Enables you to choose the mode of the keyboard illumination feature.

Keyboard Backlight Timeout on AC

Enables you to define the timeout value for the keyboard backlight when a
power adaper is plugged.

System setup

Содержание Inspiron 5481

































































































Результаты поиска

Содержание Inspiron 5481

Отзывы:

Dell Inspiron 5481, Руководство по обслуживанию, Страница: 87 / 96

Результаты поиска

Содержание Inspiron 5481

Отзывы: