Dell Inspiron 5400 2n1, Руководство по обслуживанию

Страница: 28 / 69

Steps
1. Place the power-adapter port into the slot on the palm-rest and keyboard assembly.
2. Replace the screw (M2x3) that secures the power-adapter port to the palm-rest and keyboard assembly.
3. Route the power-adapter port cable through the routing guide on the palm-rest and keyboard assembly.
4. Connect the power-adapter port cable to the system board.
5. Adhere the tape that secures the power-adapter port cable to the system board.
6. Close the right display-hinge.
7. Replace the three screws (M2.5x5) that secure the right display-hinge to the palm-rest and keyboard assembly.
Next steps
1. Install the base cover .
2. Follow the procedure in After working inside your computer .
Panel sentuh
Removing the touchpad
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Remove the base cover .
3. Remove the battery .
About this task
The following image indicates the location of the touchpad and provides a visual representation of the removal procedure.
28 Melepaskan dan memasang komponen