Dell Inspiron 5301, Руководство по обслуживанию

Страница: 22 / 70

5. Place and slide the M.2 2230 bracket on the system board, aligning the notch on the M.2 2230 bracket to the groove on the
M.2 2230 solid-state drive.
6. Replace the screw (M2x3) that secures the M.2 2230 bracket to the system board.
Next steps
1. Install the base cover .
2. Follow the procedure in After working inside your computer .
Removing the M.2 2280 solid-state drive
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Remove the base cover .
About this task
NOTE: This procedure applies only to computers shipped with a M.2 2280 solid-state drive installed.
NOTE: The M.2 card that is installed on your computer will depend on the configuration ordered. Supported card
configurations on the M.2 card slot:
● M.2 2230 solid-state drive + 2230 mounting bracket
● M.2 2280 solid-state drive
The following images indicate the location of the M.2 2280 solid-state drive and provide a visual representation of the removal
procedure.
22 Removing and installing components