Dell Inspiron 3470 Скачать руководство пользователя | Manualshive

Страница: 80 / 82

background image

Enhanced Pre-Boot System Assessment (ePSA)

diagnostics

CAUTION:

Use the ePSA diagnostics to test only your computer. Using this program with other computers may cause invalid

results or error messages.

The ePSA diagnostics (also known as system diagnostics) performs a complete check of your hardware. The ePSA is embedded with the
BIOS and is launched by the BIOS internally. The embedded system diagnostics provides a set of options for particular devices or device
groups allowing you to:

•

Run tests automatically or in an interactive mode

•

Repeat tests

•

Display or save test results

•

Run thorough tests to introduce additional test options to provide extra information about the failed device(s)

•

View status messages that inform you if tests are completed successfully

•

View error messages that inform you of problems encountered during testing

NOTE:

Some tests for specific devices require user interaction. Always ensure that you are present at the computer terminal

when the diagnostic tests are performed.

For more information, see

Dell EPSA Diagnostic 3.0

.

Running the ePSA diagnostics

1

Power-on the computer.

2

As the computer boots, press the F12 key as the Dell logo appears.

3

On the boot menu screen, select the

Diagnostics

option.

4

Click the arrow key at the bottom left corner.
Diagnostics front page is displayed.

5

Press the arrow in the lower-right corner to go to the page listing.
The items detected are listed.

6

To run a diagnostic test on a specific device, press Esc and click

Yes

to stop the diagnostic test.

7

Select the device from the left pane and click

Run Tests

.

8

If there are any issues, error codes are displayed.
Note the error code and validation number and contact Dell.

Diagnostics

The computer POST (Power On Self Test) ensures that it meets the basic computer requirements and the hardware is working
appropriately before the boot process begins. If the computer passes the POST, the computer continues to start in a normal mode.
However, if the computer fails the POST, the computer emits a series of LED codes during the start-up. The system LED is integrated on
the Power button.

The following table shows different light patterns and what they indicate.

Table 9. Diagnostics

Number of LED flashes

Problem description

2 amber, 1 amber

Motherboard failure

2 amber, 2 amber

Motherboard, PSU or PSU cabling failure

2 amber, 3 amber

Motherboard, RAM or CPU failure

80

Troubleshooting

«
...
78
79
80
81
82
»

Содержание Inspiron 3470



















































































Отзывы:

Нет отзывов

Похожие инструкции для Inspiron 3470

Бренд: Baaske Medical Страницы: 40

Бренд: Gateway Страницы: 2

FPMA-MOBILE1800

Бренд: New Star Computer Products Страницы: 4

TRS-80 Model 100

Бренд: Radio Shack Страницы: 210

Бренд: Compaq Страницы: 2

iDEQ-T1 IN294KT1

Бренд: Biostar Страницы: 53

Бренд: Zotac Страницы: 57

Бренд: Wacom Страницы: 340

Бренд: HP Страницы: 13

OptiPlex 5070 Micro

Бренд: Dell Страницы: 34

Бренд: XtendLan Страницы: 65

Бренд: Fanvil Страницы: 12

Бренд: Fanvil Страницы: 15

Бренд: Fanvil Страницы: 54

Бренд: ClearCube Страницы: 4

Бренд: ROBINHOOD Страницы: 10

Lucent Technologies 3B21D

Бренд: BELL LABS INNOVATIONS Страницы: 216

Бренд: 7starlake Страницы: 10

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды