Dell Inspiron 3470 Скачать руководство пользователя

Страница: 72 / 82

Advanced

Adapter Warnings

Enables you to choose if the computer should display warning
messages when you use AC adapters that are not supported by your
computer.
Default: Enabled

Intel Software Guard Extensions

Enable or disable Intel Software Guard Extensions.
Default: Software Controlled

Intel Software Guard Extensions allocated memory size

Displays the allocated memory size for Intel Software Guard
Extensions.

BIOS Recovery from Hard Drive

Enables you to enable or disable BIOS Recovery from hard drive.
Default: Enabled

BIOS Auto-Recovery

Enable or disable BIOS Auto-Recovery.
Default: Disabled

Always Perform Integrity Check

Enable or disable Always Perform Integrity Check.
Default: Disabled

USB Configuration

Front USB Ports

Enables you to enable or disable the front USB ports.

Rear USB Ports

Enables you to enable or disable the rear USB ports.

Power Options

Wake Up by Integrated LAN

Enables the computer to be powered on by special LAN signals.

AC Recovery

Sets what action the computer takes when power is restored.

Deep Sleep Control

Enables you to define the controls when Deep Sleep is enabled.

USB Wake Support

Enables you to enable the USB devices to wake the computer from
Standby.

Numlock Key

Enables you to set the status of the Numlock key during boot to On
or Off.
Default: Disabled

SupportAssist System Resolution

Auto OS Recovery Threshold

Control the automatic boot flow for SupportAssist System
Resolution Console and for Dell OS Recovery tool.

SupportAssist OS Recovery

The SupportAssist OS Recovery option will enable or disable the

boot flow for SupportAssist OS Recovery tool in the event of

certain system errors. If the SupportAssist OS Recovery setup

option is set to disabled then all automatic boot flow for

SupportAssist OS Recovery tool will be disabled.

Default: Disabled

Table 5. System setup options—Security menu

Security

Unlock Setup Status

Displays if the setup status is unlocked.

Admin Password Status

Displays whether the admin password is set.

System Password Status

Displays whether the system password is set.

System setup

Содержание Inspiron 3470



















































































Результаты поиска

Содержание Inspiron 3470

Отзывы:

Похожие инструкции для Inspiron 3470

Бренды по названию

Популярные бренды

Dell Inspiron 3470, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 3470

Отзывы:

Похожие инструкции для Inspiron 3470

Бренды по названию

Популярные бренды