Solid-state drive
Removing the M.2 2230 solid-state drive
Prerequisites
Before working inside your computer
.
2. Remove the
.
3. Remove the
.
4. Remove the
.
5. Remove the
.
About this task
NOTE:
The M.2 card installed on your computer will depend on the configuration ordered. The supported card
configurations on the M.2 card slot are:
●
M.2 2230 solid-state drive
●
M.2 2280 solid-state drive
NOTE:
This procedure applies only to computers shipped with an M.2 2230 solid-state drive.
The following image indicates the location of the solid-state drive and provides a visual representation of the removal procedure.
Steps
1. Remove the screw (M2x3.5) that secures the solid-state drive to the system board.
2. Slide and remove the solid-state drive from the M.2 card slot on the system board.
Installing the M.2 2230 solid-state drive
Prerequisites
CAUTION:
Solid-state drives are fragile. Exercise care when handling the solid-state drive.
30
Removing and installing components
Содержание Inspiron 24 5410 All-in-One
Страница 51: ...Removing and installing components 51 ...
Страница 54: ...54 Removing and installing components ...
