Removing the secondary memory
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the:
a.
battery cover
b.
battery
c.
hard drive
d.
keyboard
3.
Perform the following steps as shown in the illustration:
a. Remove the screw that secures the memory shield to the computer [1].
b. Lift and remove the memory shield from the computer [2].
c. Pry the retention clips away from the memory module until it pops up [3].
d. Lift the memory module and remove it from the computer [4].
Installing the secondary memory
1.
Insert the secondary memory into the memory socket.
2.
Press the clips to secure the memory module to the system board.
3.
Place the memory shield in its original position on the computer and tighten the screw to secure it to
the computer.
4.
Install the:
a.
keyboard
b.
hard drive
c.
battery
d.
battery cover
5.
Follow the procedure in
After working inside your computer
.
Removing the primary memory
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the:
a.
battery cover
b.
battery
c.
base cover
14
