4.
Perform the following steps as shown in the illustration:
a. Pry the keyboard trim starting from bottom and work along the top edge and remove it away
from the computer [1, 2, 3].
b. Remove the screws that secure the keyboard to the computer [4].
c. Lift the front side and slide the keyboard to remove it away from the computer [5].
Installing the keyboard
1.
Press and align the keyboard to its compartment.
2.
Tighten the screws to secure the keyboard to the computer.
3.
Slide in the keyboard trim from the front and align it to its position on the computer. Ensure that the
keyboard trim clicks into its place
4.
Connect the keyboard-data cable to the system board.
NOTE: Ensure that you fold the keyboard-data cable in perfect alignment.
5.
Affix the tape on the keyboard data cables.
6.
Install the:
a.
hard drive
b.
battery
c.
battery cover
7.
Follow the procedure in
After working inside your computer
.
13
