Dell Inspiron 15 5515, Руководство по обслуживанию

Страница: 59 / 76

13. Connect the I/O-board cable to the system board.
14. Adhere the tape that secures the I/O-board cable to the system board.
15. Close the right display hinge.
16. Replace the three (M2.5x4) screws that secure the right display-hinge to the palm-rest and keyboard assembly.
Next steps
1. Install the heat sink .
2. Install the fan .
3. Install the wireless card .
4. Install the M.2 2280 solid-state drive or M.2 2230 solid-state drive in M.2 slot one, whichever applicable.
5. Install the M.2 2230 solid-state drive in M.2 slot two, if applicable.
6. Install the memory module .
7. Install the 3-cell battery or 4-cell battery , whichever applicable.
8. Install the base cover .
9. Follow the procedure in After working inside your computer .
Power-adapter port
Removing the power-adapter port
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Remove the base cover .
About this task
The following images indicate the location of the power-adapter port and provide a visual representation of the removal
procedure.
Steps
1. Remove the three (M2.5x4) screws that secure the right display-hinge to the system board.
Removing and installing components 59