Steps
1. Using the alignment post, place the power-adapter port into its slot on the palmrest and keyboard assembly.
2. Connect the power-adapter port cable to the connector on the system board.
3. Fold the right hinge down and install the two (M2.5x5) screws to secure it to the palmrest and keyboard assembly.
Next steps
1. Install the
.
2. Install the
.
After working inside your computer
.
Palm-rest and keyboard assembly
Removing the palmrest and keyboard assembly
Prerequisites
Before working inside your computer
.
2. Remove the
.
3. Remove the
.
4. Remove the
.
5. Remove the
.
6. Remove the
.
7. Remove the
.
8. Remove the
.
9. Remove the
.
10. Remove the
.
11. Remove the
.
12. Remove the
.
13. Remove the
.
14. Remove the
.
15. Remove the
.
Removing and installing components
69