Back to Contents Page
Palm Rest
Dell™ Inspiron™ M301Z/N301Z Service Manual
Removing the Palm Rest
Replacing the Palm Rest
Removing the Palm Rest
1.
Follow the instructions in
Before You Begin
.
2.
Remove the battery (see
Removing the Battery
).
3.
Remove the module cover (see
Removing the Module Cover
).
4.
Remove the keyboard (see
Removing the Keyboard
).
5.
Turn the computer over.
6.
Using a plastic scribe, remove the two rubber caps that cover the palm rest screws on the computer base.
7.
Remove the three screws that secure the palm rest to the computer base.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To help prevent damage to the system board, remove the main battery (see
Removing the Battery
) before working inside the
computer.
1
rubber caps (2)
Содержание Inspiron 13z N301Z
Страница 16: ......
Страница 18: ...Back to Contents Page ...
Страница 29: ......
Страница 34: ...Back to Contents Page ...
