background image

PCI Express DVI (Digital) Adapter Card Installation and Setup Guide 

 

 

The Digital Visual Interface (DVI) adapter card, using the integrated graphics controller on your computer, provides a DVI port. The DVI port provides a direct, 
digital connection to a digital display, such as a digital flat panel display. The DVI adapter works through the integrated graphics on your computer and is 
controlled through the integrated graphics driver's user interface, which is located under the Control Panel in Microsoft

® 

Windows

® 

operating systems. The 

DVI adapter plugs into the PCI Express x16 slot on your system board.  

  

Safety Instructions

 

  

Installation Instructions

 

  

Troubleshooting

  

  

Specifications

 

  

Regulatory Notices

 

 

 

Notes, Notices, and Cautions 

Information in this document is subject to change without notice. 

© 2004 Dell Inc. All rights reserved.

 

Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. 

Trademarks used in this text: 

Dell

 and the 

DELL

 logo are trademarks of Dell Inc.; 

Microsoft,

 

Windows

, and 

Windows NT

 are registered trademarks of Microsoft Corporation; 

Intel

 is a 

registered trademark of Intel Corporation. 

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any 
proprietary interest in trademarks and trade names other than its own. 

December 2004     Rev. A01

 

NOTE: 

A NOTE indicates important information that helps you make better use of your computer. 

NOTICE: 

A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. 

 

CAUTION: 

A CAUTION indicates a potential for property damage, personal injury, or death. 

Содержание GX280DT - GX280 Desktop Computer















Отзывы: