Dell GX280DT - GX280 Desktop Computer Скачать руководство пользователя страница 10

Back to Contents Page

 

Regulatory Notices: PCI Express DVI (Digital) Adapter Card 

PCI Express DVI (Digital) Adapter Card Installation and Setup Guide 

FCC Notices (U.S. Only) 

This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed 
to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency 

energy and, if not installed and used in accordance with the manufacturer's instruction manual, may cause interference with radio communications. 

 

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  

l

This device may not cause harmful interference. 
 

l

This device must accept any interference received, including interference that may cause undesired operation.  

Class B 

 

This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed 
to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency 
energy and, if not installed and used in accordance with the manufacturer's instruction manual, may cause interference with radio communications. However, 
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television 
reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following 
measures: 

l

 

Reorient or relocate the receiving antenna. 

 

l

 

Increase the separation between the equipment and the receiver. 

 

l

 

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

 

l

 

Consult the dealer or an experienced radio/television technician for help.  

IC Notice (Canada Only) 

Most Dell computer systems (and other Dell digital apparatus) are classified by the Industry Canada (IC) Interference-Causing Equipment Standard #3 (ICES-003) as Class B digital 
devices. To determine which classification (Class A or B) applies to your computer system (or other Dell digital apparatus), examine all registration labels located on the bottom or the 
back panel of your computer (or other digital apparatus). A statement in the form of "IC Class A ICES-003" or "IC Class B ICES-003" will be located on one of these labels. Note that 
Industry Canada regulations provide that changes or modifications not expressly approved by Dell could void your authority to operate this equipment. 

CE Notice (European Union)  

Marking by the symbol 

 indicates compliance of this product to the EMC Directive and the Low Voltage Directive of the European Union. It  meets the 

following technical standards: EN 55022 Class B and EN 55024: 1998.  

MIC (Republic of Korea Only)  

Class B Device 

 

 

  

 

Please note that this device has been approved for nonbusiness purposes and may be used in any environment, including residential areas. 

 

MIC Class B Regulatory Label 

 

If the regulatory label includes the following marking, your computer is a Class B product: 

 

 

This Class B (or Class A, if so indicated on the registration label) digital apparatus meets the requirements of the Canadian Interference-Causing Equipment 
Regulations.

Cet appareil numérique de la Classe B (ou Classe A, si ainsi indiqué sur l'étiquette d'enregistration) respecte toutes les exigences du Reglement sur le 

Materiel Brouilleur du Canada. 

Содержание GX280DT - GX280 Desktop Computer















Отзывы: