4
notch
5
securing clips (2)
6
memory connectors on system board
2. Align the notch on the bottom of the module with the crossbar in the connector.
NOTICE:
To avoid damage to the memory module, press the module straight down into the socket with equal force
applied at each end of the module.
3. Insert the module straight down into the connector, ensuring that it fits into the vertical guides at each end of the
connector. Press firmly on the ends of the module until it snaps into place.
If you insert the module correctly, the securing clips snap into the cutouts at each end of the module.
Back to Contents Page
Содержание GX260 - Optiplex Pentium 4 2.0GHz 512MB 40GB CD
Страница 17: ......
Страница 64: ...Small Mini Tower Computer ...
Страница 80: ...15 Reconnect the 12 volt power cable to the 12VPOWER connector on the system board Back to Contents Page ...
Страница 87: ......