out of the sled.
Removing the Floppy Drive
1
sled tab
2
sled
Installing a Floppy Drive
1. Snap the replacement drive into the sled and ensure that it is secure in the sled.
2. Connect the interposer board to the floppy drive.
a. Slide the floppy-drive cable into the connector.
b. Close the lever so that the cable is secure in the connector.
c. Line up the hole on the bottom of the interposer board with the notch on the connector, and snap the interposer
board onto the drive.
3. Gently slide the drive into the computer until the tabs securely click into position.
Attaching the Floppy-Drive Cable
Содержание GX260 - Optiplex Pentium 4 2.0GHz 512MB 40GB CD
Страница 17: ......
Страница 64: ...Small Mini Tower Computer ...
Страница 80: ...15 Reconnect the 12 volt power cable to the 12VPOWER connector on the system board Back to Contents Page ...
Страница 87: ......