Dell G5 5090 Скачать руководство пользователя страница 83 | Manualshive

Страница: 83 / 85

Dell G5 5090 Скачать руководство пользователя страница 83

5. Turn on the wireless router.
6. Turn on the modem.
7. Turn on your computer.

Identifier

GUID-8CEF1F7A-1327-43EB-9E2E-8EC169AEFE4A

Status

Released

Flea power release

About this task

Flea power is the residual static electricity that remains on the computer even after it has been powered off and the battery has been
removed. The following procedure provides the instructions on how to conduct flea power release:

Steps

1. Turn off your computer.
2. Disconnect the power adapter from your computer.
3. Press and hold the power button for 15 seconds to drain the flea power.
4. Connect the power adapter to your computer.
5. Turn on your computer.

Identifier

GUID-FE39A314-6129-4A79-A5FA-B69617360582

Status

Released

Enabling Intel Optane memory

Steps

1. On the taskbar, click the search box, and then type

Intel Rapid Storage Technology

.

2. Click

Intel Rapid Storage Technology

.

The

Intel Rapid Storage Technology

window is displayed.

3. On the

Status

tab, click

Enable

to enable the Intel Optane memory.

4. On the warning screen, select a compatible fast drive, and then click

Yes

to continue enabling Intel Optane memory.

5. Click

Intel Optane memory

>

Reboot

to complete enabling your Intel Optane memory.

NOTE:

Applications may take up to three subsequent launches after enablement to see the full performance

benefits.

Identifier

GUID-CD2E8B90-160E-43C9-BA9D-F0F6C6BAA458

Status

Released

Disabling Intel Optane memory

About this task

CAUTION:

After disabling Intel Optane memory, do not uninstall the driver for Intel Rapid Storage Technology as it will

result in a blue screen error. The Intel Rapid Storage Technology user interface can be removed without uninstalling the
driver.

NOTE:

Disabling Intel Optane memory is required before removing the SATA storage device accelerated by the Intel

Optane memory module from the computer.

Steps

1. On the taskbar, click the search box, and then type

Intel Rapid Storage Technology

.

2. Click

Intel Rapid Storage Technology

.

The

Intel Rapid Storage Technology

window is displayed.

3. On the

Intel Optane memory

tab, click

Disable

to disable the Intel Optane memory.

Troubleshooting

83

«
...
81
82
83
84
85
»

Содержание G5 5090






















































































Отзывы:

Нет отзывов