Dell G5 5090 Скачать руководство пользователя страница 69

Страница: 69 / 85

Security

PPI ByPass for Clear Command

Enable or disable the TPM Physical Presence Interface (PPI). When enabled, this
setting will allow the OS to skip BIOS PPI user prompts when issuing the Clear
command. Changes to this setting take effect immediately.Default: Disabled

Computrace(R)

Enable or disable the BIOS module interface of the optional Computrace(R) Service
from Absolute Software.

Admin Setup Lockout

Enable to prevent users from entering Setup when an Admin Password is set.

Master Password Lockout

Disables the master password support. Hard Disk passwords need to be cleared
before changing the setting.

HDD protection

Set, change, or delete the hard-disk drive password.

SMM Security Mitigation

Enable or disable SMM Security Mitigation

Table 7. System setup options—Secure Boot menu

Secure Boot

Secure Boot Enable

Enable or disable the secure boot feature.

Secure Boot Mode

Modifies the behavior of Secure Boot to allow evaluation or enforcement of UEFI
driver signatures.

•

Deployed Mode-Default: Enabled

•

Audit Mode-Default: Disabled

Deployed Mode

Enable or disable the deployed mode.

Audit Mode

Enable or disable the audit mode.

Expert Key Management

Expert Key Management

Enable or disable Expert Key Management.

Custom Mode Key Management

Select the custom values for expert key management.

Table 8. System setup options—Intel Software Guard Extensions menu

Intel Software Guard Extensions

Intel SGX Enable

Enable or disable Intel Software Guard Extensions.

Enclave Memory Size

Set the Intel Software Guard Extensions Enclave Reserve Memory Size.

Performance

Multi Core Support

Enable multiple cores.

Default: Enabled.

Intel SpeedStep

Enable or disable Intel Speedstep Technology.

Default: Enabled.

NOTE:

If enabled, the processor clock speed and core voltage are

adjusted dynamically based on the processor load.

C-States Control

Enable or disable additional processor sleep states.

Default: Enabled.

Limit CPUID Value

Enable or disable CPUID value.

Intel TurboBoost

Enable or disable Intel TurboBoost mode of the processor.

Default: Enabled.

HyperThread control

Enable or disable HyperThreading in the processor.

Default: Enabled.

Power Management

System setup

Содержание G5 5090






















































































Результаты поиска

Содержание G5 5090

Отзывы:

Dell G5 5090, Руководство по обслуживанию, Страница: 69 / 85

Результаты поиска

Содержание G5 5090

Отзывы: