![background image](http://html.mh-extra.com/html/dell/equallogic-ps-series/equallogic-ps-series_installation-and-setup-manual_81603031.webp)
Installation and Setup
Installing a PS6500 Array
2–21
cables have sufficient slack between the array back panel and the first
connection to the cable management system ( ).
Figure 2-14: Cable Routing Diagram
2. Connect all three fasteners on the arm and place the cables below the arms.
Figure 2-15: Attaching the Hook-and-Loop Fasteners
3. Route the cables along the middle arm of the three-arm assembly, going from
4. Route the cables along the one-arm assembly (connected to the top of the left
and right rails), going from to in Figure 2-14.
After routing the cables, the installation should resemble Figure 2-16.