4. Unlatch and lift or remove the optional cable management accessory if it interferes with the PSU removal.
NOTE:
For information about the cable management when the PSU is removed or installed while the system is in a rack,
see the system’s cable management arm documentation at
https://www.dell.com/poweredgemanuals
Steps
Press the release latch and holding the PSU handle, slide the PSU out of the bay.
Figure 127. Removing a power supply unit
Next steps
1.
or replace the power supply blank.
Installing a power supply unit
Prerequisites
1. Follow the safety guidelines listed in the
.
2. For systems that support redundant PSU, ensure that both the PSUs are of the same type and have the same maximum
output power.
NOTE:
The maximum output power (shown in watts) is listed on the PSU label.
3.
.
Steps
Slide the PSU into the PSU bay until the release latch snaps into place.
112
Installing and removing system components
