background image

38

Preparing Your Systems for Clustering

Configuring the iSCSI Initiator without iSNS

On the cluster node:

1

Open the Navisphere Server Utility.

2

Select 

Configure iSCSI Connections on this cluster node

 and click 

Next

.

3

Select 

Configure iSCSI Connections

 and click 

Next

.

4

In the 

iSCSI Targets and Connections

 window, select one of the following 

options to discover the iSCSI target ports on the connected storage 
systems:

Discover iSCSI targets on this subnet

 - Scans the current subnet for 

all connected iSCSI storage-system targets. The utility scans the 
subnet in the range from 1 to 255.

If CHAP authentication is enabled on all target ports on a storage 
system, you cannot discover the iSCSI target ports using a subnet 
scan. You must discover the targets using the target portal.

Discover iSCSI targets for this target portal

 - Discovers targets known 

to the specified iSCSI SP data port.

5

Click 

Next

.

6

For each target you want to log in to:

a

In the 

iSCSI Targets

 window, select the IP address of the Inactive 

target.

b

In the 

Login Options

 section, select 

Also login to peer iSCSI target 

for High Availability

 (recommended) if the peer iSCSI target is listed.

c

If you selected 

Also login to peer iSCSI target for High Availability

 

(recommended) in step b, leave the Server Network Adapter IP set to 
Default to allow the iSCSI initiator to automatically fail over to an 
available NIC in the event of a failure.

d

Click 

Logon

 to connect to the selected target.

e

If the CHAP authentication is enabled on the target, a CHAP login 
dialog box is displayed.

Enter the CHAP security information. If you also use mutual CHAP 
for the software Initiator to authenticate the target, select the 

Mutual 

CHAP

 option and click 

OK

.

Содержание EMC AX4-5I























































Отзывы: