background image

46

Troubleshooting

Unable to add a node to 
the cluster.

The new node cannot 
access the shared 
disks.

The shared disks are 
enumerated by the 
operating system 
differently on the 
cluster nodes.

Ensure that the new cluster 
node can enumerate the cluster 
disks using Windows Disk 
Administration. If the disks do 
not appear in Disk 
Administration, check the 
following:

• Check all cable connections

• Check the LUN assignments

• In  the 

Advanced

 option, select 

Minimum

 value

One or more nodes 
may have the Internet 
Connection Firewall 
enabled, blocking 
RPC communications 
between the nodes. 

Configure the Internet 
Connection Firewall to allow 
communications that are 
required by the MSCS and the 
clustered applications 
or services.

For more information, see 
Microsoft Knowledge Base 
article KB883398 at the 
Microsoft Support website at 

support.microsoft.com

.

The disks on the shared 
cluster storage appear 
unreadable or 
uninitialized in 
Windows Disk 
Administration

This situation is 
normal if you stopped 
the Cluster Service. If 
you are running 
Windows Server 2003, 
this situation is 
normal if the cluster 
node does not own the 
cluster disk.

No action required. 

Table A-1.

General Cluster Troubleshooting 

(continued)

Problem

Probable Cause

Corrective Action

Содержание EMC AX4-5I























































Отзывы: