Dell EMC AX4-5I, Руководство по установке оборудования

Страница: 37 / 54

Preparing Your Systems for Clustering
37
To connect to the storage system:
1
On the cluster node, open the Navisphere Server Utility.
2
Select Configure iSCSI Connections on this cluster node and click Next .
3
Select Configure iSCSI Connections and click Next .
4
In the iSCSI Targets and Connections window, select Discover iSCSI
targets using this iSNS server to send a request to the iSNS server for all
connected iSCSI storage-system targets, and click Next .
5
For each target you want to log into:
a
In the iSCSI Targets window, select the IP address of the Inactive
target.
b
In the Login Options section, select Also login to peer iSCSI target
for High Availability (recommended) if the peer iSCSI target is listed.
c
If you selected the Also login to peer iSCSI target for High
Availability option (recommended) in step b, leave the Server
Network Adapter IP set to Default. This allows the iSCSI initiator to
automatically fail over to an available NIC in the event of a failure.
d
Click Logon to connect to the selected target.
e
If the CHAP authentication is enabled on the target, a CHAP login
dialog box is displayed.
Enter the CHAP security information. If you also use mutual CHAP
for the software Initiator to authenticate the target, select the
Mutual CHAP option and click OK .
6
Click Next . If the Network Interfaces (NICs) window is displayed, go to
step 7. If the Server Registration window is displayed, go to step 8.
7
In the Network Interfaces (NICs) window:
a
Deselect any NICs that are used for general network traffic and click
Apply . A confirmation dialog is displayed stating that the network
settings for your NICs have been updated and you must restart your
system to apply them.
b
Click OK and then click Next .
8
In the Server Registration window, click Next to send the updated
information to the storage system.
9
Click Finish to close the wizard.