manualshive.com logo in svg

Dell Dimension 8300 Series, Руководство по обслуживанию

Поделиться
Скачать
Dell Dimension 8300 Series Скачать руководство пользователя страница 18

 

 

2.

 

Turn off any attached devices and disconnect them from their electrical outlets.  

 

3.

 

Disconnect any telephone or telecommunication lines from the computer.  

 

4.

 

Disconnect your computer and all attached devices from their electrical outlets, and then press the power button to ground the system board.  

 

 

 

5.

 

Open the computer cover

.  

 

Installing a Floppy Drive  

1.

 

Remove the front-panel inserts

.  

 

2.

 

Gently slide the drive into place until the tabs securely click into position.  

 

3.

 

Attach the floppy-drive cable to the floppy drive and to the system board floppy-drive connector.  

 

 

Ensure that you route the floppy-drive cable through the cable restraint located on the side of the floppy-drive bay. 

4.

 

Attach the floppy-drive power cable to the floppy drive.  

 

 

 

  

5.

 

Check all cable connections and fold cables out of the way to provide airflow for the fan and cooling vents.  

 

6.

 

Close the computer cover

.  

 

 

 

7.

 

Connect your computer and devices to electrical outlets, and turn them on.  

 

8.

After you turn on your computer, press <F2> when you are prompted to enter setup mode.  
 

9.

Highlight 

Drive Configuration

 and press <Enter>.  

 

10.

Use the left and right arrows to change 

Diskette Drive A

 from 

Not Installed

 to 

3.5 inch, 1.44 MB

.  

 

11.

Press <Enter>.  
 

12.

Highlight 

Integrated Devices (LegacySelect Options)

 and press <Enter>.  

 

13.

Make sure that the 

Diskette Interface

 entry is set to 

Auto

. If necessary, use the left and right arrows to set it to 

Auto

.  

 

14.

Press <Enter>.  
 

15.

Press <Esc>.  
 

16.

Press <Enter> to save changes and exit.  
 

The computer restarts. 

See the documentation that came with the drive for instructions on installing any software required for drive operation. 

Adding or Replacing a CD/DVD Drive 

NOTICE: 

To disconnect a network cable, first unplug the cable from your computer and then unplug it from the network wall jack. 

 

CAUTION: 

To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.

NOTICE: 

To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer. 

Содержание Dimension 8300 Series


















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды