Dell D90D7, Руководство по установке

Страница: 18 / 24

14
Chapter 5
Procedures
IMPORTANT : Complete the following procedures as an administrator (administrator
privileges are required).
Step 1: Download and Ready the Firmware You Require
You must download and ready (extract) the firmware you want to use for updating
your devices before you start the Wyse USB Firmware Tool wizard. Firmware files are
normally made available in .exe or .zip format and must be downloaded and then
extracted to a local hard drive folder that is available to the Wyse USB Firmware Tool
wizard.
Wyse provides firmware for supported devices from its Software Downloads Web site
at:
http://www.wyse.com/serviceandsupport/support/downloads.asp
. Simply select the
firmware you need in the Product Downloads Active box, click Search , and use the
Active Firmware link you need.
CAUTION : For the Windows 7 operating systems, be sure to right-click on the .exe file
you downloaded (for example, the BDB0_0846_4096.exe file for the D90D7 OS image)
and select the
Run as administrator option to extract the files.
The following are examples of the Active Firmware links that you must use (names to
click) to download and extract the firmware to the local hard drive folder you want:
•
D90D7 Only - BDB0_0858_8192.exe
•
D90DW Only - ADA0_S727_2048.exe
•
X90m7 Only - BXB8_0858_8192.exe
•
X90mw Only - AXA8_S716_2048.exe
•
Z90D7, Z90S7, and Z90DE7 Only - BZB0_0858_8192.exe
•
Z90DW and Z90SW Only - AZA0_S723_2048.exe
Step 2: Install Wyse USB Firmware Tool v1.20.0.1
1.
Download the Wyse_USB_Firmware_Tool_v1.20.0.1.exe to a folder on your
machine (go to
http://www.wyse.com/serviceandsupport/support/downloads.asp
, in
the Product Downloads Active list, select USB Firmware Tool under Wyse Imaging
Tools, click Search , and then download the Wyse USB Firmware Tool software).
2.
Right-click the Wyse_USB_Firmware_Tool_v1.20.0.1.exe and click Run as
administrator to execute the file and open the WinZip Self-Extractor dialog box.
3.
Enter the destination folder you want (for example,
C:\USB_v_1.20.0.1
) in the Unzip
to folder box, and then click Unzip to extract all files from the Wyse USB Firmware
Tool v1.20.0.1.exe file into the folder. The default directory for the extracted files is
C:\USB_v_1.20.0.1
.
CAUTION : It is not recommended to use your desktop for the destination folder as
there are several files that will be extracted from the .exe file.
4.
After installation, create a shortcut on the desktop for the Wyse USB Firmware
Tool.exe file (see your operating system documentation).