Dell D90D7, Руководство по установке

Страница: 12 / 24

8
Chapter 3
5.
Remove the existing flash module. Locate the flash module and use the Phillips
Screwdriver to remove its retaining screw as shown in Figure 7. Lift the flash module
out of the socket.
Figure 7 Removing the existing flash module
6.
Install the new flash module in the reverse order of removing the original flash
module. Carefully screw down its retaining screw until it is secure.
7.
Replace the flash cover in the reverse order as described in steps 4 and 3.
CAUTION : Do not turn on the mobile thin client. The mobile thin client is ready to
re-image, however the flash module does not contain an operating system. Turning
on power to your mobile thin client without firmware will display the error message
“NO OPERATING SYSTEM FOUND.”
8.
Continue with "Installing Firmware."