background image

Back to Contents Page

  

 

 Base  

Dell™ Latitude™ D820  Service Manual

 

 

 

 

1.

Follow the instructions in 

Before Working Inside Your Computer

.  

 

 

  

2.

Remove the hard drive (see 

Hard Drive

).  

 

 

  

3.

Remove the hinge cover (see 

Hinge Cover

).  

 

 

  

4.

Remove the internal card with Bluetooth

® 

wireless technology.  

 

 

  

5.

Remove the keyboard (see 

Keyboard

).  

 

 

  

6.

Remove the display assembly (see 

Removing the Display Assembly

).  

 

 

  

7.

Remove the palm rest (see 

Palm Rest

).  

 

 

  

8.

Remove the processor thermal-cooling assembly (see 

Processor Thermal-Cooling Assembly

).  

 

 

  

9.

Remove the processor (see 

Removing the Processor Module

).  

 

 

  

10.

Remove the modem (see 

Modem

).  

 

 

  

11.

Remove the fan (see 

Fan

).  

 

 

  

12.

Remove the system board (see 

Removing the System Board

).  

 

Back to Contents Page

 

 

 

 

CAUTION: 

Before performing the following procedures, follow the safety instructions in the Product Information Guide. 

 

CAUTION: 

To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of 

your computer's electronic components. You can do so by touching an unpainted metal surface. 

Содержание D820 - Latitude Laptop Notebook







































Отзывы: