Dell D820 - Latitude Laptop Notebook Скачать руководство пользователя страница 36

Страница: 36 / 38

15.

Lift the system board out and away from the base.

Installing the System Board

Perform all the steps in

Removing the System Board

in reverse order.

Insert the battery into the battery bay.

Connect the AC adapter to the computer and to an electrical outlet.

Turn on the computer.

Insert the CD that accompanied the replacement system board into the appropriate drive. Follow the instructions on the screen.

Back to Contents Page

NOTE:

When installing the system board, ensure that you align the wireless switch on the base with the switch on the system board.

wireless switch

NOTICE:

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in

damage to the computer.

NOTE:

After replacing the system board, enter the computer Service Tag into the BIOS of the replacement system board.

Содержание D820 - Latitude Laptop Notebook







































Результаты поиска

Содержание D820 - Latitude Laptop Notebook

Отзывы:

Похожие инструкции для D820 - Latitude Laptop Notebook

Бренды по названию

Популярные бренды

Dell D820 - Latitude Laptop Notebook, Руководство по обслуживанию

Результаты поиска

Содержание D820 - Latitude Laptop Notebook

Отзывы:

Похожие инструкции для D820 - Latitude Laptop Notebook

Бренды по названию

Популярные бренды