Dell D32M Скачать руководство пользователя страница 97

Страница: 97 / 110

Table 10. System setup options—Connection menu (continued)

Connection

HTTPs Boot Mode

With Auto Mode, the HTTPs Boot extracts Boot URL from the DHCP. With
Manual Mode, the HTTPs Boot reads Boot URL from the user-provided data.

By default, the

Auto Mode

option is enabled.

Table 11. System setup options—Power menu

Power

USB PowerShare

Enable USB PowerShare

Enable or disable the USB PowerShare.

By default, the

Enable USB PowerShare

option is enabled

USB Wake Support

Enable USB Wake Support

When enabled, you can use the USB devices like a mouse or keyboard to wake
your computer from standby.

By default, the option is enabled.

AC Behavior

AC Recovery

Enables the system to turn on automatically, when AC is inserted.

By default, the

Power Off

option is enabled.

Active State Power Management

Aspm

Enables or disables the Active State Power Management (ASPM) level

By default, the

Auto

option is enabled.

Block Sleep

Enables to block entering sleep (S3) mode in the operating system.

By default, the

Block Sleep

option is disabled.

Deep Sleep Control

Enable or disable the Deep Sleep mode support.

By default, the

Disabled

option is enabled.

Fan Control Override

Enable or disable the fan control override feature.

By default, the option is disabled.

Intel Speed Shift Technology

Enable or disable the Intel speed shift technology support.

By default, the

Intel Speed Shift Technology

option is enabled.

Table 12. System setup options—Security menu

Security

TPM 2.0 Security

TPM 2.0 Security On

Enable or disable TPM 2.0 security options.

By default, the

TPM 2.0 Security On

option is enabled.

Attestation Enable

Enables to control whether the Trusted Platform Module (TPM) Endorsement
Hierarchy is available to the operating system.

By default, the

Attestation Enable

option is enabled.

Key Storage Enable

Enables to control whether the Trusted Platform Module (TPM) Storage
Hierarchy is available to the operating system.

By default, the

Key Storage Enable

option is enabled.

SHA-256

BIOS and the TPM will use the SHA-256 hash algorithm to extend
measurements into the TPM PCRs during BIOS boot.

BIOS setup

Содержание D32M















































































































Результаты поиска

Содержание D32M

Отзывы:

Похожие инструкции для D32M

Бренды по названию

Популярные бренды

Dell D32M, Руководство по обслуживанию

Результаты поиска

Содержание D32M

Отзывы:

Похожие инструкции для D32M

Бренды по названию

Популярные бренды