Dell D32M Скачать руководство пользователя страница 100

Страница: 100 / 110

Table 15. System setup options—System Management menu (continued)

System Management

Wake on LAN/WLAN

Enable or disable the computer to power on by special LAN signals when it
receives a wakeup signal from the WLAN.

By default, the

Disabled

option is selected.

Auto on Time

Enable to set the computer to turn on automatically every day or on a
preselected date and time. This option can be configured only if the Auto On
Time is set to Everyday, Weekdays, or Selected Days.

By default, the option is disabled.

Intel AMT Capability

Enable Intel AMT Capability

Enable or disable the Intel AMT capabilty.

By default, the

Restrict MEBx Access

option is enabled.

MEBx Hotkey

Enable or disable MEBx hotkey.

By default, the option is disabled.

USB Provision

Enable USB Provision

Enable or disable the Intel AMT provisioning using the local provisioning file
through a USB storage device.

By default, the option is disabled.

SERR Messages

Enable or disable SERR messages.

By default, the option is enabled.

Dell Development Configuration

Enable Flash Updated Signature Override

Enable or disable certain features to control BIOS

By default, the option is disabled.

Table 16. System setup options—Keyboard menu

Keyboard

Keyboard Errors

Enable Keyboard Error Detection

Enable or disable the keyboard error detection.

By default, the option is enabled.

Numlock LED

Enable Numlock LED

Enable or disable Numlock LED.

By default, the option is enabled.

Device Configuration Hotkey Access

Device Configuration Hotkey Access

Enable or disable users to access device configuration by using hotkeys.

By default, the option is enabled.

Table 17. System setup options—Pre-boot Behavior menu

Pre-boot Behavior

Warning and Errors

Enable or disable the action to be done when a warning or error is encountered.

By default, the

Prompt on Warnings and Errors

option is enabled.

Fastboot

Enable to set the speed of the boot process.

By default, the

Minimal

option is enabled.

100

BIOS setup

Содержание D32M















































































































Результаты поиска

Содержание D32M

Отзывы:

Похожие инструкции для D32M

Бренды по названию

Популярные бренды

Dell D32M, Руководство по обслуживанию

Результаты поиска

Содержание D32M

Отзывы:

Похожие инструкции для D32M

Бренды по названию

Популярные бренды