Option
Description
•
Enabled in S5 only
•
Enabled in S4 and S5
USB Wake
Support
Allows you to enable USB devices to wake the system from Standby.
NOTE:
This feature is only functional when the AC power adapter is connected. If the AC power
adapter is removed during Standby, the system setup removes power from all the USB ports to
conserve battery power.
•
Enable USB Wake Support
Default setting: The option is enabled..
Wake on LAN/
WLAN
Allows you to enable or disable the feature that powers on the computer from the Off state when triggered by a
LAN signal.
•
Disabled
: This option is enabled by default.
•
LAN Only
•
WLAN Only
•
LAN or WLAN
•
LAN with PXE Boot
Block Sleep
This option lets you block entering to sleep (S3 state) in operating system environment.
Block Sleep (S3 state)
Default setting: This option is disabled
POST Behavior screen options
Option
Description
Numlock LED
This option specifies whether the NumLock LED should be on when the system boots.
•
Enable Numlock LED: The option is enabled.
Keyboard Errors
This option option specifies whether the keyboard related errors are reported when it boots.
•
Enables Keyboard Error Detection: The option is enabled by default.
Fastboot
Allows you to speed up the boot process by bypassing some of the compatibility steps. The options are:
•
Minimal
•
Thorough
(default)
•
Auto
Extend BIOS
POST Time
This option created an additional pre-boot delay.
•
0 seconds (default)
•
5 seconds
•
10 seconds
Full Screen Logo
. This option displays full screen logo if your image match screen resolution. The option Enable Full Screen Logo is
not selected by default.
Warnings and
Errors
•
Prompt on Warnings and Errors
(default)
•
Continue on Warnings
•
Continue on Warnings and Errors
Virtualization support screen options
Option
Description
Virtualization
Allows you to enable or disable the Intel Virtualization Technology.
20
System setup
