Dell Color Laser Printer 2130cn, Руководство по обслуживанию

Страница: 386 / 900

1 - 360
Chapter 1 Troubleshooting
FIP-1.P13 Paper damage
Trouble substance
The paper comes out from the printer wrinkled, folded or worn-out.
ESS and possible causative parts
- HOLDER ASSY SEPARATOR (PL2.1.5)
- ROLL ASSY FEED (PL3.2.4)
- ROLL ASSY REGI (PL3.2.9)
- ROLL REGI METAL (PL3.2.10)
- FEEDER ASSY DUP (PL11.1.1)
.Tray is recommended for paper feeding because sheets fed via SSF is prone to
skew depending on how the sheet is placed on SSF.
Before commencing troubleshooting, check the paper transfer path. Make sure there is no foreign
materials on the transfer path, such as staples, paper clips, scraps of paper and so on.
Step Check
Remedy
Yes No
1
Checking dew condensation
Was the printer installed in the room where the air
conditioner well works?
Go to step 3.
Turn on the power
of the air
conditioner, and
replace a new
dray and
recommended
paper, then go to
step 2.
2 Is the image printed correctly? End of work. Go to step 3.
3
Checking the using paper
Does the using paper meet the specifications?
Go to step 5.
Use the paper that
meets the
specifications,
then go to step 4.
4 Is the image printed correctly? End of work. Go to step 5.
5
Checking the paper condition
Is the paper dry and recommended paper?
Go to step 7.
Replace the paper
with a new dry and
recommended
one, then go to
step 6.
6 Is the image printed correctly? End of work. Go to step 7.
7
Checking the COVER ASSY FRONT for latching
Open and close the COVER ASSY FRONT.
Is the image printed correctly?
End of work.
Replace the
defective parts,
then go to step 8.
8 Is the image printed correctly? End of work. Go to step 9.
9
Checking after reseating the PHD ASSY
Reseat the PHD ASSY.
Is the image printed correctly?
End of work. Go to step 10.
Mnt01117KA