Dell C9000 series, Справочное руководство

Страница: 1775 / 2286

Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the C-Series and S-Series.
Related
Commands
• private-vlan mode — sets the mode of the selected VLAN to community, isolated,
or primary.
• private-vlan mapping secondary-vlan — maps secondary VLANs to the selected
primary VLAN.
• show arp — displays the ARP table.
• show interfaces private-vlan — displays the type and status of the PVLAN
interfaces.
• show vlan private-vlan — displays the PVLANs and/or interfaces that are part of a
PVLAN.
• switchport mode private-vlan — sets PVLAN mode of the selected port.
private-vlan mode
Set PVLAN mode of the selected VLAN to community, isolated, or primary.
C9000 Series
Syntax
[no] private-vlan mode {community | isolated | primary}
To remove the PVLAN configuration, use the
no private-vlan mode {community
| isolated | primary}
command syntax.
Parameters
community Enter the keyword
community
to set the VLAN as a community
VLAN.
isolated Enter the keyword
isolated
to configure the VLAN as an
isolated VLAN.
Private VLAN (PVLAN) 1775