Dell C9000 series, Справочное руководство

Страница: 1777 / 2286

private-vlan mapping secondary-vlan
Map secondary VLANs to the selected primary VLAN.
C9000 Series
Syntax
[no] private-vlan mapping secondary-vlan vlan-list
To remove specific secondary VLANs from the configuration, use the
no private-
vlan mapping secondary-vlan vlan-list
command syntax.
Parameters
vlan-list Enter the list of secondary VLANs to associate with the selected
primary VLAN. The list can be in comma-delimited or
hyphenated-range format, following the convention for the
range input.
Defaults none
Command Modes INTERFACE VLAN
Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the C-Series and S-Series.
Usage Information The list of secondary VLANs can be:
• Specified in comma-delimited or hyphenated-range format.
• Specified with this command even before they have been created.
• Amended by specifying the new secondary VLAN to be added to the list.
Related
Commands
• private-vlan mode — sets the mode of the selected VLAN to community, isolated,
or primary.
Private VLAN (PVLAN) 1777