Dell B2360D Скачать руководство пользователя страница 84

Страница: 84 / 158

Use

Off

Use the factory default settings for all settings associated with Eco

‑

Mode. This setting supports the

performance specifications for your printer.

Energy

Reduce energy use, especially when the printer is idle.

•

Printer engine motors do not start until a document is ready to print. You may notice a short delay
before the first page is printed.

•

The printer enters Sleep mode after one minute of inactivity.

Energy/Paper Use all the settings associated with Energy and Paper modes.

Paper

•

Enable the automatic two

‑

sided (duplex) printing feature.

•

Turn off print log features.

Press

Adjusting Sleep mode

To save energy, decrease the number of minutes before the printer enters Sleep mode.

Available settings range from 1 to 120 minutes. The factory default setting is 30 minutes.

Note:

Sleep mode can be scheduled. For more information, see “Using Schedule Power Modes” on page 86.

Using the Embedded Web Server

From the Embedded Web Server, click

Settings

General Settings

Timeouts

In the Sleep Mode field, enter the number of minutes you want the printer to wait before it enters Sleep mode.

Click

Submit

Using the printer control panel

From the printer control panel, navigate to:

Settings

General Settings

Timeouts

Sleep Mode

In the Sleep Mode field, select the number of minutes you want the printer to wait before it enters Sleep mode.

Press

Using Hibernate mode

Hibernate is an ultra

‑

low

‑

power operating mode. When operating in Hibernate mode, all other systems and devices

are powered down safely.

Note:

Hibernate mode can be scheduled. For more information, see “Using Schedule Power Modes” on page 86.

Using the Embedded Web Server

Open a Web browser, and then type the printer IP address in the address field.

Saving money and the environment

Содержание B2360D































































































































































Результаты поиска

Содержание B2360D

Отзывы:

Похожие инструкции для B2360D

Бренды по названию

Популярные бренды

Dell B2360D, Руководство пользователя

Результаты поиска

Содержание B2360D

Отзывы:

Похожие инструкции для B2360D

Бренды по названию

Популярные бренды