Dell Alienware m17 R2 Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 70

background image

Steps
1. Peel the Mylar covering the system board.
2. Remove the screw (M2x3) that secures the wireless card bracket to the left I/O-board.
3. Lift the wireless-card bracket off the left I/O-board.
4. Disconnect the antenna cables from the wireless card.
5. Remove the two screws (M2x3) that secure the left I/O-board cable to the left I/O-board and the system board.
6. Lift the left I/O-board cable off the left I/O-board and the system board.
7. Peel the tapes securing the antenna cables to system board and left fan.
8. Remove the screw (M2x4.5) that secures the M.2 connector shield to the system board.
9. Remove the M.2 connector shield from the system board.
10. Remove the two screws (M2x3) that secure the right I/O-board cable to the right I/O-board and the system board.
11. Lift the right I/O-board cable off the right I/O-board and the system board.
12. Disconnect the power-adapter port cable from the system board.
13. Disconnect the coin-cell battery cable from the system board.
14. Lift the latch and disconnect the keyboard-controller board-cable from the system board.
15. Lift the latch and disconnect the display cable from the connector on the system board.
16. Disconnect the G-sensor cable from the connector on the system board.
17. Disconnect the Tobii eye tracker cable from the connector on the system board.

NOTE: This step is only applicable to computers shipped with a Tobii eye tracker.

18. Lift the latch and disconnect the touchpad cable from the touchpad.
19. Remove the four (M2.5x5) screws that secure the fans to the palm-rest assembly.
20.Remove the five (M2x3) screws that secure the system board to the palm-rest assembly.
21. Lift the system board from the palm-rest assembly and turn the system board over.
22.Lift the latch and disconnect the touchpad cable from the system board.
23.Remove the

fan and heat-sink assembly

Installing the system board

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.

41

«
...
39
40
41
42
43
...
»

Содержание Alienware m17 R2







































































Отзывы:

Нет отзывов

Похожие инструкции для Alienware m17 R2

Бренд: Clevo Страницы: 156

Бренд: EUROCOM Страницы: 104

Бренд: Razer Страницы: 13

Бренд: Dell Страницы: 59

A13-USE002AM - Adamo - Laptop

Бренд: Dell Страницы: 58

Бренд: Dell Страницы: 21

Бренд: Acer Страницы: 79

PCG-Z1RA Marketing Specifications Sheet

Бренд: Sony Страницы: 1

Бренд: Sony Страницы: 1

Бренд: Sony Страницы: 1

PCG-VX89 VAIO User Guide (primary manual)

Бренд: Sony Страницы: 1

Бренд: Sony Страницы: 1

Бренд: Sony Страницы: 1

Бренд: Sony Страницы: 2

Бренд: Sony Страницы: 1

Бренд: Sony Страницы: 1

PCG-TR2A - VAIO - Pentium M 1 GHz

Бренд: Sony Страницы: 2

Бренд: Sony Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды