Dell Alienware m15 R3 Скачать руководство пользователя страница 71

Страница: 71 / 81

Option

Description

PPI Bypass for Clear

Command

Enables you to control the TPM Physical Presence Interface (PPI). When enabled, this setting will

allow the OS to skip BIOS PPI user prompts when issuing the Clear command. Changes to this setting

take effect immediately.

Computrace (R)

Allows you to activate or disable the optional Computrace software.
The options are:
•

Deactivate

•

Disable

•

Activate—Default

Secure boot

Table 8. Secure Boot

Option

Description

Boot List Option

Displays the available boot options.
•

Legacy

•

UEFI

Default: UEFI

File Browser Add Boot Option

Enables you to add the boot options.

File Browser Del Boot Option

Enables you to delete the boot options.

Secure Boot

Enables or disables the Secure Boot Feature.
Choose one of the options:
•

Secure Boot Enable

•

Secure Boot Disable

Default: Enabled

Legacy Option ROMs

Enables or disables the Legacy Option ROMs.
Default: Disabled

Attempt Legacy Boot

Enables or disables Attempt Legacy Boot.
Default: Disabled

Boot Option Priorities

Displays the boot sequence.

Boot Option #1

Displays the available first boot option.

Boot Option #2

Displays the available second boot option.

Boot Option #3

Displays the available third boot option.

Secure boot

Table 9. Secure Boot

Option

Description

Boot List Option

Displays the available boot options.
•

Legacy

•

UEFI

Default: UEFI

File Browser Add Boot Option

Enables you to add the boot options.

File Browser Del Boot Option

Enables you to delete the boot options.

Содержание Alienware m15 R3


















































































Результаты поиска

Содержание Alienware m15 R3

Отзывы:

Dell Alienware m15 R3, Руководство по обслуживанию, Страница: 71 / 81

Результаты поиска

Содержание Alienware m15 R3

Отзывы: