manualshive.com logo in svg

Dell Alienware m15 R3, Руководство по обслуживанию, Страница: 47 / 81

Поделиться
Скачать
Dell Alienware m15 R3 Скачать руководство пользователя страница 47

Steps
1. Install the 

fan and heat-sink assembly

.

2. Install the 

left I/O-board

.

3. Turn the system-board assembly over and place the system-board assembly on the palm-rest assembly.

NOTE: When the system board is installed it is removed as an assembly consisting of:

• system board
• left I/O-board
• fan and heat-sink assembly

4. Align the screw holes on the system board with the screw holes on the palm-rest assembly.
5. Replace the two (M2x3) screws that secure the left I/O-board to the palm-rest assembly.
6. Replace the eight (M2x3) screws that secure the system board to the palm-rest assembly.
7. Replace the three (M2x3) screws that secure the fan and heat-sink assembly to the palm-rest assembly.
8. Replace the two (M2x4.5) screws that secure the fan and heat-sink assembly to the palm-rest assembly.
9. Connect the G-sensor cable to the connector on the system board.

NOTE: Ensure that you connect the G-sensor cable before you connect the display cable.

10. Connect the Tobii eye tracker cable to the connector on the system board.

47

Содержание Alienware m15 R3


















































































Отзывы:

Нет отзывов