Dell Alienware m15 R3 Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 81

Dell Alienware m15 R3 Скачать руководство пользователя страница 45

15. Remove the two (M2x4.5) screws that secure the fan and heat-sink assembly to the palm-rest assembly.
16. Remove the three (M2x3) screws that secure the fan and heat-sink assembly to the palm-rest assembly.
17. Remove the five (M2x3) screws that secure the system board to the palm-rest assembly.
18. Remove the two (M2x3) screws that secure the left I/O-board to the palm-rest assembly.
19. Lift the system-board assembly from the palm-rest assembly and turn the system-board assembly over.

NOTE: When the system board is removed it is removed as an assembly consisting of:

• system board
• left I/O-board
• fan and heat-sink assembly

20.Remove the

.

21. Remove the

fan and heat-sink assembly

Installing the system board

Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.

About this task
The following image(s) indicate the location of the system board and provides a visual representation of the installation procedure.

45

«
...
43
44
45
46
47
...
»

Содержание Alienware m15 R3


















































































Отзывы:

Нет отзывов