Dell Alienware M11x R3 Скачать руководство пользователя

Страница: 28 / 42

Back to Contents Page

Status Light Board

Alienware

M11x R3 Service Manual

Removing the Status Light Board

Replacing the Status Light Board

Removing the Status Light Board

Follow the instructions in

Before You Begin

Remove the base cover (see

Removing the Base Cover

Remove the battery pack (see

Removing the Battery Pack

Follow the instructions from

step 4

step 6

Removing the Hard Drive

Remove the memory module(s) (see

Removing the Memory Module(s)

Remove the hinge cover (see

Removing the Hinge Cover

Remove the keyboard (see

Removing the Keyboard

Remove the palm rest assembly (see

Removing the Palm Rest Assembly

Turn the palm rest assembly over.

10.

Disconnect the speaker lights cable from the connector on the status light board.

11.

Push the connector latch up and pull the pull-tab to disconnect the power board cable from the connector on the status light board.

12.

Lift the connector latch and pull the pull-tab to disconnect the status light board cable from the connector on the status light board.

13.

Remove the five screws that secure the status light board to the palm rest assembly.

14.

Lift the status light board off the palm rest assembly.

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on your computer).

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™

is not covered by your warranty.

CAUTION:

To help prevent damage to the system board, remove the main battery (see

Removing the Battery Pack

) before working inside the

computer.

1 speaker lights cable connector

2 power board cable connector

3 status light board cable connector

Содержание Alienware M11x R3











































Результаты поиска

Содержание Alienware M11x R3

Отзывы:

Похожие инструкции для Alienware M11x R3

Бренды по названию

Популярные бренды

Dell Alienware M11x R3, Руководство по обслуживанию

Результаты поиска

Содержание Alienware M11x R3

Отзывы:

Похожие инструкции для Alienware M11x R3

Бренды по названию

Популярные бренды