manualshive.com logo in svg

Dell Alienware M11x R3, Руководство по обслуживанию, Страница: 25 / 42

Поделиться
Скачать
Dell Alienware M11x R3 Скачать руководство пользователя страница 25

Back to Contents Page

  

 

 Keyboard  

Alienware

® 

M11x R3 Service Manual  

  

Removing the Keyboard 

 

  

Replacing the Keyboard 

 

 

 

 

 

 

 

 

 

Removing the Keyboard  

 

 

1.

Follow the instructions in 

Before You Begin

.  

 

 

  

2.

Remove the base cover (see 

Removing the Base Cover

).  

 

 

  

3.

Remove the battery pack (see 

Removing the Battery Pack

).  

 

 

  

4.

Follow the instructions from 

step 4

 to 

step 6

 in 

Removing the Hard Drive

.  

 

 

  

5.

Remove the memory module(s) (see 

Removing the Memory Module(s)

)  

 

 

  

6.

Remove the two screws that secure the keyboard to the computer base.  
 

  

 

 

 

 

 

 

7.

Turn the computer over and open the display as far as possible.  
 

 

  

8.

Remove the hinge cover (see 

Removing the Hinge Cover

).  

 

 

  

9.

Remove the two screws that secure the keyboard to the computer base.  
 

 

WARNING: 

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best 

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. 

 

CAUTION: 

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal 

surface (such as a connector on your computer).

 

CAUTION: 

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ 

is not covered by your warranty.

 

CAUTION: 

To help prevent damage to the system board, remove the main battery (see 

Removing the Battery Pack

) before working inside the 

computer.

 

CAUTION: 

The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful when removing and handling the 

keyboard.

 

CAUTION: 

Be extremely careful when removing and handling the keyboard. Failure to do so could result in scratching the display panel.

Содержание Alienware M11x R3











































Отзывы:

Нет отзывов