Back to Contents Page
Internal Card With Bluetooth Wireless Technology
Alienware
®
M11x R3 Service Manual
Removing the Bluetooth Card
Replacing the Bluetooth Card
If you ordered a card with Bluetooth wireless technology with your computer, it is already installed.
Removing the Bluetooth Card
1.
Follow the instructions in
Before You Begin
.
2.
Remove the base cover (see
Removing the Base Cover
).
3.
Remove the battery pack (see
Removing the Battery Pack
).
4.
Follow the instructions from
step 4
to
step 6
in
Removing the Hard Drive
.
5.
Remove the memory module(s) (see
Removing the Memory Module(s)
).
6.
Remove the hinge cover (see
Removing the Hinge Cover
).
7.
Remove the keyboard (see
Removing the Keyboard
).
8.
Remove the palm rest assembly (see
Removing the Palm Rest Assembly
).
9.
Remove the screw that secures the Bluetooth card to the system board.
10.
Lift the Bluetooth card to disconnect it from the connector on the system board.
Replacing the Bluetooth Card
1.
Follow the instructions in
Before You Begin
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To help prevent damage to the system board, remove the main battery (see
Removing the Battery Pack
) before working inside the
computer.
1
screw
2
Bluetooth card
Содержание Alienware M11x R3
Страница 3: ...Back to Contents Page ...
