Dell Alienware Area-51m R2, Руководство по обслуживанию, Страница: 65 / 94

Steps
1. Connect the left power-adapter port cable to the system board.
2. Place the left power-adapter port in the slot on the palm-rest assembly.
3. Slide and place the power-adapter board bracket on the palm-rest assembly.
4. Replace the screw (M2x3) that secures the power-adapter port bracket to the palm-rest assembly.
Next steps
1. Install the
heat-sink assembly .
2. Install the computer base .
3. Install the rear-I/O cover .
4. Install the solid-state drive interposer board , if applicable.
5. Install the solid-state drive in M.2 slot four , if applicable.
6. Install the solid-state drive in M.2 slot three , if applicable.
7. Follow the procedure from step 5 to step 8 in Installing the hard drive , if applicable.
8. Install the solid-state drive in M.2 slot one .
9. Install the wireless card .
10. Install the memory modules .
11. Install the battery .
12. Install the base cover .
13. Follow the procedure in After working inside your computer .
System board
Removing the system board
Prerequisites
1. Follow the procedure in
Before working inside your computer .
2. Remove the base cover .
3. Remove the battery .
4. Remove the memory modules .
5. Remove the wireless card .
65