Dell Alienware Area-51m R2 Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 94

Dell Alienware Area-51m R2 Скачать руководство пользователя страница 40

Installing the audio daughter-board

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

NOTE: After replacing the audio daughter-board, you must set up the keyboard language and color.

The following image indicates the location of the audio daughter-board and provides a visual representation of the installation

procedure.

Steps
1. Place the audio daughter-board in the slot on the palm-rest assembly.
2. Replace the three screws (M2.5x2.5) that secure the audio daughter-board to the palm-rest assembly.
3. Connect the speaker cable to the audio daughter-board.
4. Connect the keyboard-controller cable to the audio daughter-board and close the latch to secure the cable.
5. Connect the keyboard-backlight cable to the audio daughter-board and close the latch to secure the cable.
6. Connect the keyboard cable to the audio daughter-board and close the latch to secure the cable.
7. Connect the audio daughter-board cable to the audio daughter-board and close the latch to secure the cable.

Next steps
1. Install the

solid-state drive interposer board

, if applicable.

solid-state drive from M.2 slot four

, if applicable.

solid-state drive from M.2 slot three

, if applicable.

4. Follow the procedure from step 5 to step 8 in

Installing the hard drive

, if applicable.

.

6. Follow the procedure in

After working inside your computer

.

40

«
...
38
39
40
41
42
...
»

Содержание Alienware Area-51m R2































































































Отзывы:

Нет отзывов