Installing a memory card
CAUTION—SHOCK HAZARD:
If you are accessing the system board or installing optional hardware or memory
devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the
wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well,
and unplug any cables going into the printer.
Warning—Potential Damage:
System board electronic components are easily damaged by static electricity. Touch
a metal surface on the printer before touching any system board electronic components or connectors.
An optional memory card can be purchased separately and attached to the system board. To install the memory
card:
1
Turn the printer off.
2
Access the system board.
3
Unpack the memory card.
Note:
Avoid touching the connection points along the edge of the card.
4
Align the memory card with its connector on the system board.
5
Push open the latches on both ends of the memory connector.
Warning—Potential Damage:
Memory cards are easily damaged by static electricity. Touch a grounded metal
surface before you touch a memory card.
Note:
Memory cards designed for other printers may not work with your printer.
Additional printer setup
34
Содержание 2230
Страница 1: ...Dell 2230d Laser Printer User s Guide November 2008 www dell com support dell com ...
Страница 8: ...8 ...
Страница 15: ...1 USB port 2 Parallel port 3 Printer power cord socket Learning about the printer 15 ...
Страница 109: ...3 Remove the jammed paper 4 Close both the front and rear doors 5 Press to continue printing Clearing jams 109 ...
