Dell 2230 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 128

Dell 2230 Скачать руководство пользователя страница 21

Universal Setup menu

These menu items are used to specify the height, width, and feed direction of the Universal Paper Size. The Universal
Paper Size is a user-defined paper size. It is listed with the other paper size settings and includes similar options, such
as support for duplex printing and printing multiple pages on one sheet.

Menu item

Description

Units of Measure

Inches

Millimeters

Identifies the units of measure

Notes:

•

Inches is the US factory default setting.

•

Millimeters is the international factory default setting.

Portrait Width

3–14.17 inches
76–360 mm

Sets the portrait width

Notes:

•

If the width exceeds the maximum, then the printer uses the
maximum width allowed.

•

8.5 inches is the US factory default setting. Inches can be increased
in 0.01-inch increments.

•

216 mm is the international factory default setting. Millimeters can
be increased in 1-mm increments.

Portrait Height

3–14.17 inches

76–360 mm

Sets the portrait height

Notes:

•

If the height exceeds the maximum, then the printer uses the
maximum height allowed.

•

14 inches is the US factory default setting. Inches can be increased in
0.01-inch increments.

•

356 mm is the international factory default setting. Millimeters can
be increased in 1-mm increments.

Feed Direction

Short Edge

Long Edge

Specifies the feed direction

Notes:

•

Short Edge is the factory default setting.

•

Long Edge appears only if the longest edge is shorter than the
maximum length supported in the tray.

Understanding the printer menus

21

«
...
19
20
21
22
23
...
»

Содержание 2230

































































































































Отзывы:

Нет отзывов