Service Manual
40
plugging in the VGA /DVIcable. Exit Burn-in mode method as followe: plugging in the
VGA/DVI cable, press “Menu” button to call out OSD Main Menu, Press “Plus Key”to
select“Other Settings submenu”then choose Factory reset.
Auto Color Balance (Automatically calibrate chip ADC parameter by
using chip internal DAC.)
5.1 If it is a new-built set, press “
Auto/Plus
” button to execute “Auto Color” at
standard video pattern
5-MOSAIC
pattern
5.2 Please confirm the following steps to perform “Auto Color Balance”:
- Connect the VGA cable with the standard video pattern generator and display
5-MOSAIC
pattern on the monitor.
- press “
Power
” button
on right corner of front bezel
to turn off the monitor.
- Press “
Menu
” and “
Ù
”(
Plus
)buttons together, and then press “
Power
” button
to turn on the monitor. After power on, the device is enter factory
modode ,press “
Ù
”(
Plus
)buttons to call out factory menu
- choose
Auto Color
item, then execute
Auto Color
item.
- After the “
Auto Color Balance
” process finished, go back to “Other Settings Menu”, and press
“Factory Reset” to exit Factory mode
Upgrade Firmware to Serial via Flash Cable by ISP_Tool V4.100.exe
7.1 Connect the monitor and PC follow Fig 11
Содержание 2209WA - UltraSharp - 22" LCD Monitor
