Dell 2135CN, Руководство по обслуживанию

Страница: 342 / 896

1 - 314
Chapter 1 Troubleshooting
Version 1 2008.02.01
FIP-1. 72 Paper Jam 077-900
Step Check
Remedy
Yes No
Possible causative parts:
FUSER ASSY (PL6.1.1)
PWBA MCU (PL10.7.7)
HARN ASSY FUSER (PL10.8.6)
1
Checking the paper feeding
Was a paper fed from SSF?
Go to step 2. Go to step 4.
2
Checking the paper setting
Was the paper correctly set to SSF without slant?
Go to step 4.
Set the paper to
SSF correctly, and
go to step 3.
3 Does the error still occur when printing? Go to step 4. End of work.
4
Checking the paper condition
Is the paper wrinkled or damaged?
Replace the paper
with a new and dry
one, then go to
step 5.
Go to step 6.
5 Does the error still occur when printing? Go to step 7. End of work.
6
Checking after reloading a new paper
Reload a new paper.
Does the error still occur when printing?
Go to step 7. End of work.
7
Checking the COVER ASSY FRONT for latching
Open and close the COVER ASSY FRONT, and then latch
correctly.
Does the error still occur when printing?
Go to step 8. End of work.
8
Checking the FUSER ASSY
Are there any remaining paper and/or foreign substance in
the FUSER ASSY?
Warning: Start the operation after the FUSER ASSY has
cooled down.
Remove the paper
and/or substance,
then go to step 9.
Go to step 9.
9
Checking after reseating the FUSER ASSY
Reseat the FUSER ASSY.
Warning: Start the operation after the FUSER ASSY has
cooled down.
Does the error still occur when printing?
Go to step 10. End of work.
10
Checking the Exit Sensor for operation
Does the number on the screen increase by one, when the
actuator of the Exit Sensor in the FUSER ASSY is
operated?
Checked by [Digital Input]-[DI-03] of [IOT Diag] in [Printer
Diag] of diagnosis.
Warning: Start the operation after the FUSER ASSY has
cooled down.
Replace the
PWBA MCU.
(Refer to Removal
31/ Replacement
29.)
Go to step 11.